Component A alkaline conditioning bleaching compound designed to swell timber pores and activate bleaching reaction on raw wood.
Component B active oxygen chemical bleaching compound that de-pigments natural wood tannins and lightens wood tone.
Formulated for European oak, American walnut, dark teak, ash, and architectural veneer lightening.
Parisha 2-Part Bleaching Compounds (PTC 625-A and PTC 625-B) chemically break down dark natural tannins and lignin color centers without damaging the timber cellulose structure. Transforms dark or streaky wood into uniform light Scandinavian blondes.
Lightens dark red and brown oak into modern pale Nordic and driftwood wood tones.
Eliminates stark color differences between light sapwood and dark heartwood boards.
Removes unsightly dark mineral lines, iron stains, and watermarks from exotic veneers.
Provides an ultra-pale neutral canvas for applying white-wash, grey-wash, and pastel stains.
Sequential application of Bleaching Compound A and Bleaching Compound B with proper neutralization.
Wood must be raw and free from finishes, wax, or oil. Sand along grain with P180 grit paper.
Apply PTC 625-A generously using a synthetic sponge or nylon brush. Allow 10–15 minutes penetration.
Apply PTC 625-B directly over the damp Agent A. The chemical foaming reaction will begin immediately.
For extreme lightening on very dark woods (e.g. walnut), repeat the A + B process after 2 hours.
Wipe down thoroughly with a clean sponge soaked in clean water (or 5% vinegar solution) to stop reaction.
Allow timber to dry completely for 24–48 hours. Lightly sand raised grain with P240–P320 before topcoating.
Personal protective equipment protocols and environmental safety.
Always wear chemical-resistant nitrile gloves, safety goggles, and apron during application.
Use in well-ventilated areas or under workshop spray extraction hoods.
Leaves zero chemical salt efflorescence beneath subsequent 2K PU clear coats.
Bleached wood tones will not revert or re-darken when sealed with Parisha 2K Acrylics.
Active ingredients decompose into harmless water, oxygen, and biodegradable residues.
Store in original high-density polyethylene containers away from direct heat and metal contact.
Maximum lightening potency, safe on timber fibers, and flawless topcoat adhesion.
Far more powerful than single-pack household bleaches or oxalic acid solutions.
Maintains timber hardness, density, and crisp grain definition.
The essential foundation for creating high-demand bleached oak and ash furniture.
Accepts Parisha 2K Acrylics, PU lacquers, and waterborne topcoats with zero adhesion loss.
Supplied in convenient 3.6L container pairs for effortless workshop handling.
Approved by top UAE interior architectural consultants for luxury residential millwork.