Two-component solvent-free epoxy penetrating primer with ultra-low viscosity and 100% solids formulation engineered for zero-VOC indoor concrete floor installations and cleanroom environments.
High-solids solvent-free epoxy resin floor coating curing to a glossy, seamless, chemical-resistant, and heavy-wearing surface for commercial and industrial facilities.
High quality, two component, solvent free epoxy resin floor coating Anti Bacteria . It cures to a hard gloss finish with excellent adhesion. Formulated with active antimicrobial additives that inhibit bacterial growth in hospitals, clinics, and food processing plants.
Engineered for hospitals, cleanrooms, pharmaceutical laboratories, food & beverage processing plants, and commercial kitchens.
Parisha Solvent Free epoxy systems contain zero volatile organic compounds (VOCs) and zero solvents, allowing safe application in occupied hospitals and operating food facilities. ConCoat EP250-AB provides continuous antibacterial protection preventing bacterial colonization.
Active antimicrobial technology destroys bacterial cells on contact, maintaining ultra-sterile healthcare environments.
Seamless, non-tainting floor finish resistant to organic acids, animal fats, daily hot water washdowns, and detergents.
Completely non-dusting and non-gassing 100% solids epoxy matrix meeting strict GMP and FDA cleanroom standards.
Impervious to continuous wet conditions, lactic acids, sugars, and aggressive clean-in-place (CIP) chemicals.
No solvent fumes or odor; allows flooring installations during normal facility operations without shutdown.
Active antimicrobial formulation inhibits E. coli, MRSA, Salmonella, and mold colonization.
100% solids cure without solvent evaporation, resulting in 100% volume retention and high dry film build.
Glass-like glossy surface eliminates grout lines and joints where bacteria and dirt normally accumulate.
Application guidelines for zero-VOC cleanroom and healthcare flooring.
Vacuum-assisted diamond grind to remove surface laitance and create an open, receptive concrete pore profile.
Mix Part A and Part B thoroughly. Apply Prime EP100 by rubber squeegee and back-roll to seal all pinholes.
Pour mixed 100% solids resin onto the floor. Spread evenly with notched squeegee and spike-roll to release micro-bubbles.
Walkable in 24 hours at 25°C. Full chemical and biological resistance achieved within 5–7 days.
LEED v4, Green Star, and international health authority compliant.
Contains zero aromatic solvents or volatile compounds, contributing directly to LEED v4 building certification.
Tough epoxy matrix remains undamaged under automated hot water floor scrubbers and sanitizing washdowns.
Completely inert when cured; safe for direct and indirect food preparation and storage zones.
Tested to international standards demonstrating 99.9% reduction in bacterial proliferation over 24 hours.
Odorless safety, antimicrobial protection, and seamless mirror aesthetics.
Provides round-the-clock defense against hospital-acquired infections and bacterial contamination.
Can be applied in adjacent rooms while doctors, patients, or factory personnel continue working normally.
Forms a rigid, rock-hard floor surface that supports heavy medical equipment and storage racking.
Supplied in pre-dosed base and hardener units ensuring perfect polymerization without weighing scales.