Nano-ceramic modified 2K PU velvet matt clear anti-scratch topcoat delivering superior scratch, scuff, and abrasion resistance.
Ultra-hard 2K PU full gloss clear anti-scratch topcoat delivering diamond-like surface hardness, optical depth, and permanent gloss retention.
Formulated for luxury dining tables, hotel reception counters, retail display fixtures, and executive boardrooms.
Parisha Anti-Scratch PU systems utilize nano-ceramic and silica reinforcement to achieve 4H surface hardness. Prevents micro-scratching from dinnerware, keys, laptop cases, and abrasive cleaning pads.
Withstands sliding ceramic plates, sharp cutlery contact, and continuous restaurant cleaning.
Resists scuff marks from metal luggage zippers, hotel keycards, and coin friction.
Eliminates circular swirling and abrasive drag lines caused by laptops and office equipment.
Preserves showroom mirror gloss and velvet matt aesthetics under high customer touch.
Preparation over 2K PU Sealer or Polyester base coats.
Ensure base sealer (PTC 201 or PTC 501 Polyester) is sanded completely flat with P400–P600 grit.
Mix PTC 25XX-SP / PTC 2599-SP with CP007 catalyst (50%) as recommended for maximum scratch resistance.
Add 15% to 20% PTC THN-PU1 Polyurethane Thinner to achieve 17–19 seconds Ford Cup 4.
Apply 1-2 wet cross-coats at 2.5–3.0 bar pressure with 10–15 minutes flash-off between passes.
Dust free: 25 mins. Handleable: 6–8 hours. Full scratch resistance develops after 72 hours cure.
PTC 2599-SP Gloss can be machine buffed and compounded with fine paste after 48 hours.
Tested against aggressive solvents, household chemicals, and extreme ambient heat.
Resists coffee, red wine, bleach, vinegar, and acetone spills without surface damage.
Contains specialized UV absorbers protecting light woods from sunlight yellowing.
Retains high flexibility and adhesion during sudden indoor to outdoor temperature shifts.
Will not blister, whiten, or leave heat rings from hot coffee mugs (up to 95°C).
Complete seal against moisture ingress and wood grain swelling.
Cured film is completely inert, odorless, and safe for food preparation counters.
4x greater abrasion resistance, zero haze, and enduring showroom finish.
Retains gloss and sheen 400% longer than conventional polyurethane coatings.
High surface density prevents scratch furrows from metal objects and keys.
Choose between non-glare velvet Matt (PTC 25XX-SP) or high-reflection Gloss (PTC 2599-SP).
Resists body oils and finger smudges, reducing routine cleaning maintenance.
Fast solvent release allows coated furniture to be moved and installed quickly.
Supplied in convenient workshop can sizes and bulk production drums.