Deep penetrating exterior acrylic primer/sealer designed to withstand UAE intense UV and climatic variations.
Weather-resistant acrylic exterior wall putty for filling surface cracks and preparing facade substrates.
100% pure acrylic exterior facade emulsion offering anti-fungal, anti-carbonation, and UV protection.
Semi-gloss pure acrylic exterior protective finish with self-cleaning rain-wash capability.
High-sheen 100% acrylic facade shield against extreme UV rays and marine atmospheric exposure.
Formulated with 100% pure acrylic resins and advanced UV blockers for residential villas, commercial towers, boundary walls, and coastal resorts.
Parisha Itashield Exterior Emulsion and Weatherproof systems deliver supreme resistance against extreme Middle Eastern sunlight, temperature swings, windborne sand erosion, and high coastal humidity.
Long-lasting vibrant exterior color retention and smooth sheen that resists UV degradation and chalking for 10+ years.
High-build crack-bridging elastomeric protection with certified anti-carbonation barrier shielding reinforced concrete structures.
High resistance to airborne saline moisture, salt crystallization, and continuous marine humidity without peeling.
Tough acrylic matrix repels abrasive desert dust and high-velocity windblown sand particles.
Optimal system buildup on cement plaster, fair-faced concrete, precast panels, and existing weathered facades.
Substrate must be fully cured (min. 28 days) with moisture content < 10% and pH < 10. Clean off laitance, dust, and efflorescence.
Apply 1 full coat of PTC 1051 All Weather Texture / Primer to consolidate chalky substrates and seal masonry porosity.
Fill hairline surface cracks and indentations with PTC 2507 Exterior Putty. Allow 4-6 hours drying before sanding smooth.
Apply 2 coats of PTC 3701 (Matt), PTC 3751-SG (Semi-Gloss), or PTC 3751 (Glossy) using roller, brush, or airless spray.
First coat can be thinned 10-15% with clean water; second coat thinned 5-10% to achieve maximum opacity and film build.
Touch dry in 45–60 minutes at 30°C. Recoat after 4–6 hours. Full film cure and weather resistance achieved in 7 days.
Tested against 50°C+ summer heatwaves, intense UV solar index, sandstorms, and coastal saline air.
Formulated with photostable light stabilizers and non-chalking inorganic pigments that prevent fading under intense Arabian sun.
High diffusion resistance to atmospheric CO2 and sulfur dioxide, preventing concrete carbonation and internal rebar rust.
Hard cross-linked acrylic surface prevents airborne fine sand from embedding into the coating during seasonal desert dust storms.
Blocks salt aerosol penetration, protecting buildings in Dubai Marina, Palm Jumeirah, and Abu Dhabi coastal strips.
Permits moisture vapour within the wall to escape into the atmosphere, completely eliminating bubbling and blistering.
Waterborne, non-flammable, and low VOC formulation conforming strictly to Dubai Municipality environmental specifications.
Maximum weather shielding, premium sheen choices, and unbeatable life-cycle durability.
Utilizes 100% pure acrylic binder rather than cheap styrene-acrylic blends, guaranteeing superior flexibility and weather resistance.
High-grade architectural tinting pastes ensure long-lasting color brilliance with zero yellowing or pigment chalking.
Choose between understated modern Itashield Matt (PTC 3701), balanced Semi-Gloss (PTC 3751-SG), or gleaming Glossy (PTC 3751).
Flexible film expands and contracts with substrate thermal movement, bridging hairline shrinkage cracks on facades.
Quick film coalescence prevents rain-washout if unexpected showers occur shortly after application.
Seamless compatibility with PTC 1051 Primer and PTC 2507 Putty for a unified, warrantable exterior coating system.