Two-component polyamide cured red oxide epoxy primer (A+B) providing superior anticorrosive adhesion and chemical resistance on sandblasted structural steel.
Two-pack white epoxy primer (A+B) pigmented with non-toxic active zinc phosphite for clean structural fabrication and industrial machinery.
High-performance grey 2K epoxy zinc phosphite primer (A+B) engineered for aggressive atmospheric and industrial corrosion prevention.
Heavy-duty 2K epoxy primer with advanced phosphate anti-rust inhibitors for heavy fabrication, warehouses, and structural steel.
Maximum protection 2K epoxy zinc chromate primer (A+B) for chemical plant steel, coastal structures, and refinery pipe racks.
Cathodic galvanic protection 2K epoxy zinc-rich primer containing high metallic zinc dust content to prevent sub-film corrosion creep on blasted steel.
High-build 2K epoxy intermediate coat (A+B) providing high film build, impermeability, and a smooth bonding foundation between primer and topcoat.
Micaceous Iron Oxide (MIO) epoxy barrier coat (A+B) forming an overlapping lamellar shield against moisture, salt, and UV penetration.
Surface-tolerant high-solids epoxy mastic (A+B) engineered for maintenance painting over manually cleaned or aged existing coatings.
Chemical, solvent, and alkali resistant 2K polyamide cured epoxy enamel topcoat (A+B) for internal tank linings, machinery, and factory floors.
Pigmented high-gloss 2K epoxy topcoat (A+B) available in standard RAL industrial safety, equipment, and decorative colors.
Two-pack high-gloss transparent epoxy clear varnish (A+B) for chemical splash protection, sealing, and dustproofing.
Heavy-duty high-build coal tar epoxy coating (A+B) engineered for buried steel pipelines, sewage treatment plants, pilings, and submerged structures.
High-build 2K epoxy intermediate barrier coat (A+B) engineered for multi-coat high-durability industrial and marine protective systems.
Engineered for oil & gas refineries, chemical plants, offshore structures, bridge steel, and industrial infrastructure.
Parisha 2K Epoxy systems offer complete multi-layer defense: from galvanic zinc-rich primers (PTC 1701) that sacrificially protect steel, to lamellar MIO barrier intercoats (PTC 2522), and chemical-resistant topcoats (PTC 3551).
Certified systems protecting steel structures, pipelines, and tank farms against aggressive chemicals.
Heavy-duty MIO barrier systems preventing corrosion from environmental moisture and vehicle exhaust.
PTC 3380-HV Coal Tar Epoxy provides impervious water and chemical barrier for buried pipe and sewage tanks.
Durable high-solids epoxy topcoats resisting forklift abrasion, oil spills, and heavy solvent washdowns.
High metallic zinc content provides active electrochemical protection, arresting rust even if the film is scratched.
Overlapping crystalline MIO platelets block moisture, salt ions, and UV degradation from reaching the primer.
Cured epoxy matrix resists immersion and splashes from alkalis, mineral acids, oils, and industrial solvents.
Bonds tenaciously over minimally prepared or aged intact coatings where abrasive blasting is not possible.
Application guidelines for 3-coat heavy duty industrial protection.
Grit blast to Sa 2.5 with a sharp angular profile of 40–75 µm for maximum mechanical zinc bonding.
Apply 1 coat by airless spray. Ensure continuous agitation to keep heavy zinc particles suspended.
Apply 1 high-build coat of PTC 2522 MIO or PTC 2521-HB. Provides high film thickness and moisture barrier.
Apply 2K Epoxy Topcoat (PTC 3551 for interior/tanks) or 2K Polyurethane Topcoat (PTC 3861 for exterior UV).
Certified for ISO 12944 C5-I (Industrial) and C5-M (Marine) severe corrosive environments.
Withstands continuous submersion in sea water, raw water, and wastewater without blistering or softening.
Shields structural steel in chemical processing plants, fertilizer factories, and smelters.
High cross-link density resists heavy mechanical wear, wheel scuffing, and abrasive sand erosion.
Multi-coat epoxy systems deliver 15+ years of maintenance-free service life under severe Middle Eastern climates.
Ultimate cathodic defense, high build flexibility, and comprehensive chemical barrier.
PTC 1701 Zinc Rich primer prevents rust from spreading beneath the paint film if mechanically damaged.
Micaceous iron oxide flakes create a tortuous path that halts moisture and salt ion penetration.
Bonds tenaciously to sandblasted steel, hot-dip galvanized metal, cast iron, and concrete floors.
Supplied in pre-measured base and hardener units for foolproof mixing and maximum site productivity.