Deep penetrating exterior acrylic primer and sealer designed to promote superior mechanical adhesion for textured coatings.
Ultra-fine aggregate architectural texture coating delivering a delicate, subtle stipple relief finish.
Fine particle acrylic texture finish for smooth spray or roller architectural feature facades and interior ceilings.
Medium aggregate textured coating providing high-build dimensional relief and excellent defect-hiding opacity.
Heavy-duty coarse aggregate textured plaster for rugged architectural facades, perimeter walls, and rustic finishes.
High-gloss pure thermoplastic acrylic topcoat glaze providing ultimate UV protection, color locking, and dirt-shedding.
Semi-gloss thermoplastic protective topcoat with superior washability, rain-cleansing, and weather shielding.
Non-reflective velvet matt thermoplastic topcoat preserving the natural stone look while sealing against moisture.
Engineered for luxury villa compound walls, commercial building facades, interior acoustic feature panels, and landmark architectural projects across Dubai & UAE.
Parisha Textured Paints combine high-solids acrylic polymers, mineral aggregates, and thermoplastic topcoats to deliver exceptional crack-bridging flexibility, rugged impact resistance, and textured aesthetics.
High-build decorative relief in Mini, Fine, Medium, and Coarse aggregate grades that disguise substrate unevenness and provide luxury architectural texture.
Extreme impact and abrasion resistance formulated to protect high-traffic public facades and commercial entryways.
Spray or trowel-applied textured finishes adding tactile warmth and acoustic dampening to luxury reception areas, lobbies, and stairwells.
PTC 3105, 3111, and 3121 Thermoplastic systems shield textured relief profiles against UV discoloration, dirt accumulation, and harsh desert weathering.
Engineered for cement plaster, fair-faced concrete, precast panels, blockwork, and gypsum board.
Ensure concrete or render is cured (>28 days) with moisture content < 10%. Remove all surface efflorescence, oil, and loose debris.
Apply 1 full coat of PTC 1051 All Weather Texture / Primer to equalize surface suction and promote deep mechanical anchor keying.
Apply PTC 2051, 2005, 2605, or 2705 evenly. For spray texture, maintain consistent gun distance (45–60 cm) and atomizing air pressure (3–4 bar).
After texture cures (24–48 hours), apply 1-2 coats of Thermoplastic Topcoat in Gloss (3105), Semi-Gloss (3111), or Matt (3121) for UV and dirt shielding.
PTC 1051 Primer: 10-15% water. Texture compounds: ready to use, or max 3-5% water if required for spray atomization.
Surface dry in 2-4 hours. Firm cure in 24 hours. Full weather resistance and mechanical hardness achieved after 7 days.
Formulated to withstand extreme heat cycles, driving sandstorms, and coastal saline humidity.
Non-fading lightfast pigments and pure acrylic binders prevent surface chalking, blistering, and yellowing under severe Middle East sun.
Reinforced aggregate matrix resists scouring from high-velocity desert winds and abrasive airborne sandstorms.
Encapsulated biocidal active agents inhibit algae and fungal growth on shaded facade sections and damp architectural profiles.
Thermoplastic resin barrier prevents salt aerosol penetration, protecting exterior facades across beachfront resorts and islands.
Allows internal wall vapour to breathe outwards naturally without compromising the waterproof exterior barrier.
Waterborne formulation meeting Dubai Municipality standards, non-hazardous to applicators with zero toxic off-gassing.
Premium architectural relief, long-lasting surface protection, and unmatched versatility.
Effectively conceals substrate undulations, uneven joints, and minor surface defects that standard flat paints reveal.
High elasticity accommodates structural thermal expansion and contraction without cracking or flaking.
Full freedom of design from refined fine spray texture (PTC 2005) to bold heavy rustic relief (PTC 2705).
Thermoplastic topcoats (PTC 3105/3111/3121) lock in colors and provide outstanding dirt-shedding washability.
Quick setting formulation permits early handling and topcoating, reducing project turnaround times for contractors.
Complete single-manufacturer coating system from PTC 1051 Primer to Thermoplastic topcoats for total peace of mind.