Specialized barrier isolator base designed to block natural wood resins, oils, and tannins before polyester application.
100% isocyanate hardener for PTC 181 Isolator ensuring maximum chemical seal and adhesion.
Ultra high-build 100% solids clear polyester sealer set for pore filling on luxury exotic veneers.
Thixotropic clear polyester topcoat formulated for sag-free high-build application on vertical panels.
Self-leveling clear polyester topcoat designed for horizontal tabletops and conference counters.
Heavy-duty non-shrinking white polyester primer set for glass-flat piano finish MDF millwork.
Pure white polyester topcoat with anti-sag vertical rheology for architectural walls and doors.
High-opacity pure white horizontal polyester topcoat for flat tabletop and panel pressing.
Methyl ethyl ketone peroxide (MEKP) catalyst for curing unsaturated polyester systems.
Cobalt-based accelerator promoter for initiating redox polymerization in polyester systems.
Formulated for grand pianos, luxury yacht interiors, high-gloss conference tables, and ultra-luxury boutique joinery.
Parisha Polyester systems cure via radical polymerization of styrene and polyester resins without solvent evaporation shrinkage. Creates a glass-like solid resin block that can be sanded and polished to absolute optical flatness.
Cures without shrinkage ridges or grain telegraphing, enabling flawless buffing.
High film build (up to 500 microns) fills open-grain burr walnut and ebony in single day.
Extreme surface flatness with zero witness lines or orange peel reflections.
Provides pristine optical depth and high-end aesthetic luxury.
IMPORTANT: Never mix Accelerator (PTC 731) directly with Catalyst (PTC 730) – severe fire hazard.
Add Accelerator (PTC 731) into Resin FIRST and mix thoroughly. Add Catalyst (PTC 730) LAST.
Add 2% by weight of PTC 731 Accelerator, stir 2 mins, then add 2% of PTC 730 Catalyst.
Mix only what can be sprayed within 20 minutes at 25°C. Clean spray gun immediately after use.
Spray 2-3 wet coats with 5-10 minutes flash-off to achieve 300–500 µm wet film thickness.
Allow 16–24 hours cure before machine dry sanding with P240, P320, P500, P800, and P1000.
Apply 2K PU Clear Gloss or White Gloss over sanded polyester for ultimate depth.
Immune to moisture swelling, heat distortion, and household solvents.
100% moisture vapor barrier preventing wood movement and veneer warping.
Resists hot dish contact and temperature variations without softening or crazing.
Immune to thinners, alcohol, acetone, and cleaning chemicals once fully cured.
Retains crack-free structural adhesion during rapid air-conditioning cycles.
Nearly 100% of the applied material remains on the substrate as cured protective film.
Completely encapsulates wood fibers, starving fungal spores and preventing rot.
Unsurpassed mirror depth, zero shrinkage guarantee, and rock-hard sanding base.
The global standard for grand piano, luxury yacht, and bespoke furniture finishes.
Cured film never shrinks into veneer pores, maintaining permanent showroom glass flatness.
Eliminates weeks of repetitive sealer spraying and pore-filling cycles.
Specialized formulations for vertical panels (anti-sag) and horizontal counters (self-leveling).
Sands cleanly without gumming or clogging high-grit orbital sander discs.
Spec-approved for royal palaces, luxury superyachts, and 5-star presidential suites.